“Vertical Wet Pit Cantilever Pump Handles Solids Up To 4” Diameter
Vertiflo Pump company makes a rugged, dependable Vertical Wet Pit Series 1100 Cantilever pump with a vortex, fully recessed impeller which is designed for solids pumping in light to medium slurries in many mining applications including floating retention pond pumping systems. Coal Prep Plants can rely on the durability of this pump design too. Flows to 1600 GPM and heads to 170 feet. Pump length up to 6 feet. Solids handling up to 4” diameter. Shaft diameter to 5”. Material of construction includes cast iron, 316 s.s., CD4, Alloy 20 and 28% Chrome iron for various application requirements. Also available is the 1200 Series centrifugal Cantilever pumps with flows to 2500 GPM and heads to 140 feet. Perfect for the tough applications requiring the Cantilever design and construction but with smaller solids pumping capability. Available in the same materials of construction except not in 28% C.I.”
The Series 800 industrial vertical immersion sump pump from Vertiflo Pump Company can be used for sump drainage, flood control and process drainage to meet EPA and U.S. Occupational Safety and Health Administration (OSHA) requirements.
Designed for severe service at heads to 230 ft and temperatures to 350°F, the pump and operates in pit depths to 26 ft and up to 3,000 gpm.
The Vertiflo pump includes carbon line shaft bearings, semi-open impeller with external adjustment, high-thrust angular contact ball bearing, 416 stainless steel shafts to 1 15/16 ins and a standard NEMA C face motor. Construction materials available are cast iron, 316 stainless steel or alloy 20.
Vertiflo Pump Company offers a rugged, dependable Series 900 Industrial Vertical Immersion Vortex Sump Pump for service in industrial and municipal applications. Vortex design provides an unrestricted flow since the impeller is not normally in contact with the solids being pumped. Applications include chemical slurries, fragile food processing solids, paper & pulpy solids, petroleum and oils, sewage, wastewater treatment, and textiles. Solids handling up to 4” diameter spheres. Designed for long life in severe services with heads to 170 feet, temperatures to 350° F, pit depths up to 26 feet deep with flows to 1600 GPM. Construction options include cast iron, 316 stainless steel fitted, all 316 stainless steel, Alloy 20 and CD4MC. All Vertiflo pumps are delivered fast, usually shipped in one-half the typical lead time.
Vertiflo Pump Company’s Model 1400LF “Low Flow” is used for a wide range of applications including boiler feed, condensate, chemical process, washdown and spray washers. Capacities to 50 GPM, heads to 345 feet TDH, and temperature to 250˚ F. Back pull-out construction allows for easy inspection or service/ maintenance without disturbing the piping to the pump, an important cost-saving feature. Radial vane impeller has external impeller adjustment. Packing or various mechanical seal arrangements are available as standard options. Construction material selection includes ductile iron, bronze fitted, 316 stainless steel fitted and all 316 stainless steel.
Horizontal base-mounted end suction pumps are designed for use with any T or U-frame motor, or with virtually any type of drive, also available as a vertical wet pit pump.